Search results

Being on them new batteries, mine are 6 years old. 😆

Do you any fenders for a M35A2, I see that you posted you have 2 1/2 ton parts but didn't say which one.

I'm in, my deuce needs some new batteries.

Any M35A2 cabs, or parts?

Well my fears were justified, the seal was in backwards, but all is not lost. I was able to carefully get it out and reverse it With very little trouble. Once reversed and installed the drum went on with clearance for the bushing and the keys. I am ecstatic, didn’t have to spend more money and...

I guess there are no specs, I will just be careful not to strip them out. Thanks everyone for sharing the wealth of knowledge and experiences.

These pics will help, I intend on working on it again this afternoon and let you what I find. thanks

When I put the oil seal in the end of the drum that goes to the drive end, I may have put it in backwards. When I put the drum onto the shaft and seat the seal, and go to install the sliding clutch keys on the other end of the shaft they will not go in, because there isn't enough room end to...

does anyone have a picture of the drum with the seal inserted correctly, that wood answer all my questions about the seals.

Is the seal to keep the oil in the housing from escaping and leaking onto the ground from the bushing, or is it to keep the oil in the drum from leaking out of the drum and onto the ground?

Thanks so much, I didn't know about this manual, but I have it now.

It appears that i have stumped everyone, or posted in the incorrect place.

It looks like I have stumped everyone, or I have posted in the incorrect place.

What is the correct way to install the oil seal in the drum on the worm gear/bull gear end. I have looked in the manuals and cannot find the right way. I already installed one with the spring side of the seal facing out or towards the housing when installed. I am beginning to believe this is...

I have looked at the manuals for the winch and the truck, and cannot find any torque specs for the winch mounting bolts or any of the assorted other bolts that hold the winch together. I believe the winch housings are what I believe to be manganese, and using steel bolts in manganese can get...

I agree that it is a pain, but i think it is a necessary evil for the reasons above.

These are just what need to make one. I really appreciate you taking the time capture these and post them.

Wow I didn’t realize it was part of the crossmember. Yes please send measurements, I believe I am going to have to make it. thanks

I have been thru both of these manuals time and time again, and do not see this part, if you know what the part number/NSN is please share it so I can locate it. these manuals are limited in the parts that are frame attached. Thanks