Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You can override them with a 9V battery and a pushbutton switch but you need to know what you're doing. As a temporary measure I drove the gates of the MOSFETs in the box with a 9V battery to power the plugs to get the truck started. You can't use the vehicle power because the MOSFETs are on...
Check the level and bleed it and inspect everything in the truck that runs off of hydraulics for leaks.
http://hummer-hmmwv.tpub.com/TM-9-2320-387-24-1/css/TM-9-2320-387-24-1_1112.htm
Mine puked most of the fluid out when the fan clutch hose came off. It's no fun driving one of these trucks...
WTB MX-10862 single SINCGARS mount.
Here's what one looks like:
http://www.prc68.com/I/RT1439.shtml#MX-10862
I would have some interest in purchasing the AM-7239 dual mount if I can't locate a single radio power supply.
Thanks.
You only need a technician class to legally use the 6M band which the VRC-12 series will cover. It's pretty easy to get. The biggest problem with using the RT-524, PRC-77, etc. is the 50kHz tuning steps. Another problem is the 150Hz tone coded squelch but that can be turned off. The RT-524...
It's probably the box if your glow plugs show continuity. You want to also check to make sure that both connectors are screwed in tightly. Usually, at least with the KDS boxes, you'll get a brief flash from the WAIT light when switching to the RUN position. The reason this happens is that the...
Auction 4/29
Paid and submitted EUC 4/29
EUC sent 6/2
Submitted to TSC, pending approval 6/3
EUC approved 6/18
Based on what I saw posted here, I figured it would clear this week but I was pleasantly surprised.
I am just south of route 30 in Hayesville and I'm leaving Friday morning in my 151. I'm meeting another guy along the route who also has a 151 along the way so if you are interested in convoying part of the way there just reply to this thread and we'll try and work something out. I'll be...
It's an M151A2, an early Ford A2 in fact since it lacks the notches on the front fenders. It's not worth anything as a 6x6 as far as I'm concerned but could be cut back down if the price is right.
It was definitely a good time and met a lot of good folks. I had the 151 parked next to my buddy's gama goat and in front of the mule. I almost bought that nice m416 down at the corner but it was probably a good thing I didn't. :roll:
Greetings all. I'm not very familiar with these trucks but have always liked the looks of them. Anyways, during a trip into town yesterday I noticed an M215 behind the autoparts store and stopped in to ask if it was for sale. The guy wants to sell it but neither of us know a reasonable price...
My M1009 came from the INARNG with the resistor bypassed however this creates problems for the single battery and alternator that now runs them. I just am getting tired of the alternator belt squealing after I start the truck as it tries to quickly recharge the battery after it runs the plugs...
Without a picture I'm not sure what it is that you have but generally speaking an "oven" in relation to crystals (OCXO or oven controlled crystal oscillator) is just a temperature controlled quartz crystal based oscillator. The crystal is heated to a constant known temperature that way it...
So far I've replaced the front U-joints and ball joints, plugged a leak in the fuel filter, welded in a new section of rocker panel on the driver's side, and most recently replaced the exhaust from the manifold back.
Other than that I've put the antennas and radios in but will be switching...