Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
clutch
i had a simler problem on a unimog 401 , if you remove the floor plate between the seats you will find a inspection cover , this will give you axes to the clutch ,i slackend the bolt and fitted longer ones removing presue off the plate this alowed the plate to brake free ,
your moter should be a M180 . Look on the drivers side of the block below plug 6 for the engine number ,hope this helps. M130 was fitted to some trucks with hard cabs became standard fit from about 1973.
I have a 2.8 Isuzi trooper engine running a 45 kva gen youses all my wast oil thined with whats to hand then run through a 3 micron filter ,has heated fuel filter little slugish till up to temp then runs fine .
unimog trailer
I youse a 1ton British army sanky of late 50s vintage behind my 1958 404 ,hitch hight and size match runing on 900x20 tyers . I have added photos of 2 other old soldiers for your plesure.