Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks for the input! I worked on the trk this weekend and got it working. I'm not really sure what changed unless the step up pump in the injector pump was in a position to block the flow of fuel. Just because I was at a loss, I turned over the engine, and the fuel started passing through...
I need help! I changed the fuel filters on my m35, it was running perfectly before, now, the fuel will pass the primary fuel filter and goto the injector pump, but stops there. I have disconnected the line at the secondary filters and blown backwards with air to no avail. The rubber hose going...
I enjoy driving my 211 and try to do so every 2 weeks to keep the tranny lubricated and fresh. I rebuilt the 302 and got a transmission from memphis equipment before they quit working on them. I would be very interested in knowing how fast it will run and the power it has. After the rebuild...
thanks for the info. I tried one of the best gasket sets with so-so results. I was hoping to drive it to evansville for the convention, but still leaking too much for a drive like that. I drove the m35a2 instead. Too bad there wasn't any 211's or 135's there. I too am wondering about a...
The rear main on my XM211 is leaking alot, a coffee can size puddle when the engine is cut off. I have installed a new one with the same results. Does anyone have any suggestions? I would try it again if I thought it would turn out differently.
m211 parts
I have a 53 Xm211, have had it for about 6 years. For the wheel cylinders, I went to Oreilly's and rebuilt the wheel cylinders for about 1 dollar each, just buying new cups. I also rebuilt the master cylinder, think the parts came from memphis equipment. Tires and wheels are out...