• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. O

    3 x geared hubs leaking

    Looking good.. PM is key
  2. O

    What have you done to your HMMWV today/lately

    Im thinking 1/4" stall mat on the inner fender well with maybe rivnuts to hold....
  3. O

    2000 HMMWV M1123 Project

    I bet that was fun driving home ๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚
  4. O

    New Wheels and Tires

    Impressive ! Thx
  5. O

    Lenders for HMMWV purchase?

    Your state HMMWV freindly ?
  6. O

    Is this a typo mistake or it’s possible?

    So a 242 will direct bolt onto a TH400 ?? Hijacked ๐Ÿ˜‚๐Ÿ˜‚
  7. O

    Lenders for HMMWV purchase?

    If you gotta get a loan, you cant afford the maintenance.. My 2cents.. Pay cash for it then start racking up all your credit cards on maintenanvce.. ๐Ÿ‘๐Ÿ‘๐Ÿ‘
  8. O

    New Wheels and Tires

    Curious as to why not being able to use HMMWV lug nuts.. The end taper on lug nuts seems to be similar.. Since both HMMWV wheels and these seem to be lug centric, why couldnt they be used ? Thanks for any input.. Im guessing too wide,, wonder if i could trim off half these ugly lugs and...
  9. O

    New Wheels and Tires

    Bump
  10. O

    Humvee floor mats

    3/4 horse stall mat. Smooth side up so water can flow under mat easily to weep holes. Strong forearms and razor knife with metal straight edge. Lots of measuring. The added weight helps with stiff suspension and killing some rattles. I probably added 200lbs of matting. Nice option in my...
  11. O

    Runflat Lubricant alternatives

    Dont drive 30mph for 30 miles.. And you should be fine
  12. O

    Holy hell ๐Ÿคฆ‍โ™‚๏ธ๐Ÿคฆ‍โ™‚๏ธ

    Damper on air intake? shut off manually or electricly .. Question is, how much air do you havce to remove/stop to kill engine? I could get a damper to seal out maybe 80-85% of incoming air. I will probably toss in a fuel valve in cab where DWF hole is.. That still leave quite a bit of fuel...
  13. O

    New Wheels and Tires

    Can you use HMMWV lug nuts with that setup ? And spill the beans or your centering protocol.. Im interested. Thanks Ocho Out !! PS.. I can get these mounted ballanced and delivered for $1750 but im assuming Ill need a rebalance after adding hardware ?? What you say ?
  14. O

    IDLER ARM BROKE

    Spring spacer !! Definately caused this fracture. Impropper geometries ๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚
  15. O

    Geared hub input seal

    Can you determine if its leaking from inner or outter area? I use aviation sealer on the outter surface of my seals.. A biotch getting out, but no leaks there.. 2cents
  16. O

    Geared hub input seal

    Theres not much fluid up that high in the hub.. wondering why your leaking so bad..
  17. O

    *1990 M998A0 Refresh*

    195-210....the sweet spot
  18. O

    What have you done to your HMMWV today/lately

    Use care when working with parts on your roof.. Shingles can get slippery ๐Ÿ˜‚
  19. O

    OUT AND ABOUT WITH MY HMMWV

    Drain pipe for the pole barnโ€ฆ.
  20. O

    Replacing Exterior Bolts with Stainless

    Make sure you clearcoat the threads ๐Ÿ‘๐Ÿ‘๐Ÿ‘
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks