Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
remove thermostat, rinse radiator,fill with 3 bottles CLR from grocery store, top off with water. run until operating temp has been reached than an additional 10 minutes or 20-25 min total...... drain system 2 twice to be sure all CLR is gone.. replace radiator hoses and new themostat..... This...
Our diesels are kinda forgiving especially since there not cluttered with all this modern electronic junk. Yet one schould still be carefull around electrical contacts. Here is what I do.
Spray some WD40 on and around electrical connections ( this will help repell water so there is minimal...
How reliable of a reading would u get from T'ng into a heater hose??? Seems to be a much easier install? Would't u need to have it flowing at all times through the core? That would suck during the Hot summer!
Thanks for the tip Crash about the purple wire's, Hooked everything up today and everything seems to work great she started wright up.. I could't find out what rating that link was so I installed a 30 amp fuse there instead!! Thanks guys.....
OK so i drive to my buddies house everything is fine.. I turn off the truck and ten minutes later jump back in her to run to the store, turn the Key and all i hear is a click??? So I try again a second time again just a click, the 3rd 4th and 5th try there are no more clicks just silence???? So...
Newbie here, Just got my M1028 a month ago! My Gen 2 light was coming on as well"only at idle" so I removed both alt's and brought them in for rebuild both tested good? Had em rebuilt anyways! My re-builder did notice that one of the pulleys was larger thus Running slower? He had a matching...