• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. N

    Received 2002 M1097A2 for firetruck build - looking for advice

    There's a very well put together engine cooling troubleshooting flowchart in the TMs. Problem is that most people don't have the correct diagnostic tools to complete the tests, (i.e. a radiator cap pressure tester etc). Just Sayin
  2. N

    Oil in the coolant

    I'd check the trans cooler portion of the Radiator. I've seen them fail inside of the Radiator and cause Tranny Fluid to contaminate the Coolant. Btw, You're Mechanic skipped a few diagnostic steps before assuming and pulling the heads off.
  3. N

    water in engine

    So when is a good time to get a "Baseline" using an oil analysis? I've found that the sooner a "Baseline" condition is recorded, (via a sample oil analysis), the easier potential problems and excessive wear indicators can be found.
  4. N

    Seized ether start solenoid

    Call Midwest 636-900-9046 They're a bit pricey but, how much is your time worth?
  5. N

    Seized ether start solenoid

    What does the TM say about cleaning/maintaining the Unit? Usually the Maintenence/Repair Proceedure Manual says something to the effect; "Use Cleaner NSN: 123abc or equivalent, Do not use Solvents/Cleaners that contain XYZ."
  6. N

    BATTERY DISCONN dash warning light

    They say that 60 is the new 30.....I wish they'd tell all my Orthopedic-Systems that.
  7. N

    Basic Tester Needed for Testing Both Positive and Negative DC Circuits

    I was taught that you Buy a Quality Tool only ONCE. Its worth the Time, Labor and Headaches to have good tools. One of the easiest and best tools that I've carried is a Circuit Tester that reacts to both the Positive, (Energized +) and the Negative (Ground Return -). The one thing you need to...
  8. N

    Seized ether start solenoid

    It'd make it easier if you'd post the year and model of truck you have. When trying to disassemble the Valve try to fine a solvent/cleaner that will break down the dirt/corrosion and not hurt the Valve or the medium that the Valve controls, (I.e. oil, water, fuel etc). The Solvent also needs...
  9. N

    water in engine

    I'd start sending your oil change samples to Blackstone. Blackstone Labs Oil Test Kits
  10. N

    M1078a1p2 electrical problem

    I suspect a possible BAD GROUND CONNECTION somewhere. when you cycle a DC Item and a different and isolated circuit activates it means that the Ground Return on Circuit #1 is faulty and sought out the nearest/Easyest pathwat to Ground to complete the circuit. Note: Even when a DC connection...
  11. N

    ECO Hubs Who needs 3:07 gears?

    Thank you Sir Again, Good Job!
  12. N

    ECO Hubs Who needs 3:07 gears?

    Good Catch Sir!
  13. N

    ECO Hubs Who needs 3:07 gears?

    A) What Material did you use and; B) Have you an estimated/actual Rockwell Hardness? Good job!
  14. N

    Wobbling Pulley Stuck

    Amazing Discovery.... The secrets that hide beneath the covers of a Technical Manual..lol
  15. N

    Caterpillar C7 HEUI Oil Pump Failure Bulletin and Retrofit

    Here's the Caterpillar Service Bulletin that address the HEUI Oil Pump Failure and Retrofit new parts. CAT Media Number -M0068178-00 Dated 02/22/2016 C7 Heui Fix
  16. N

    Snow chains on FMTV tires

    +1
  17. N

    Snow chains on FMTV tires

    Can't wait to see pics of your Autochains when you get them installed :)
  18. N

    LAS VEGAS_BRAND NEW M1097R1 owner- Any tips?

    You have an awesome Father! Congrats on the new acquisition.
  19. N

    Modifying an AS3900 Antenna for CB use

    Over the years I haven't had too much luck trying to fit(i.e. tune) a broadband antenna to a mobile application. Its a whole lot easier using a mobile antenna that designed to work in the frequency band of the transmitter. Most adjustible load mobile HF Antennas are INHO not rugged enough for...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks