Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Does anyone know a part number or where to get the cable that goes from the remote to the crane on a M977 HEMTT? The cable would be a 14 pin female. I have attached a picture of the port on the crane and remote
Does anyone know how the struts for the slant back hatch are supposed to be assembled and adjusted? The kit comes with two tubes, 2 rubber plugs, 2 pinch clamps and 2 different length gas struts.
Thanks
Ryan
Not sure what catagory to put this in so if the moderators want to move it please do. I got this frame with a DUKW several years ago and have no idea what it is. I don't think it has anything to do with the DUKW but it is painted with WW2 forest green and primed with the good old yellow zinc...
I am missing the box that houses the remote control on my MK17. Does anyone have an idea where I might be able to find one? Any assistance is greatly appreciated.
Thanks
Ryan
I just bought a m923a2 and wanted to figure out what it takes to bypass the ctis at the wheels. I have to go do a recovery next week and the truck has a flat tire. I want to make sure I have the tools and parts to bypass the system if I need to.
Thanks
Ryan
I am trying to replace the valve for charging the trailer brakes. I bought a pp7 bendix valve and it does. Not seem to be right. The number in the TM does not match any bendix or civilian numbers. Has anyone replaced that valve and what part number did you use?
Thanks
Ryan
My tractor and trailer is giving me grey hairs fast. I am trying to go for my class A on Thursday and I am having problems with my trailer. Here is what it is doing. When I do my test in cab to lower the air pressure the trailer brakes never pop out. The air pressure on primary and secondary...
My M931 has developed a leak at the fan clutch when it engages. It is leaking from between the shaft and the clutch. Can these be rebuilt? I am on a time crunch as I have to take my Class A test on Thursday and I'm worried they will fail me if the fan comes on and I start losing air. Any advice...
What is the deal with GL removing data plates? I purchased a drop deck trailer from them and after I got it home I noticed all four rivets drilled and no data plate. Why would these idiots do that? Now I have no specs for scales or vin number.:rant:
This has been a big project that was started Thanksgiving of last year and completed today. The truck had some mechanical issues and one thing led to another and the whole truck got torn down with a full repaint.
Ryan
I am trying to find replacement orings for the LVS. I broke down a few wheels and mine are all rotten. The nsn is 5331-01-215-7325. I have had no luck finding anything online.
Thanks
ryan
I have a Allison ht 740 behind a Detroit 8v92 in a mk48 that I an having problems with. When I put the truck in forwards the converter locks and stalls the truck. When put in reverse the converter is unlocked and operates normally. I have bypassed the external lock up selinoid and checked to...
Does anyone know where to buy the little rubber plugs for the air brake canisters on a 900 series and LVS? These are the plugs that cover the area you go into to cage the brakes.
Thank you
Ryan
I just acquired a CCKW and I'm trying to get it all dialed in. The brakes have new linings, wheel cylinders, and hoses. The problem I am having is that the brakes are way to sensitive. If I just touch them it wants to lock up the brakes or applies them to hard. It also drags the brakes after...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!