Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I used a hose to wrap around my wires and taped them good, I also used the knockouts that were in the box and I could not find grommets big enough to fit the knockouts! That tool box is so much easier to get to the batteries than under the seat in my opinion!
I drove the truck about 75 miles with no issues to the hot hand glove protectors. I too have had fingers in the gloves srivvel up due to the heat from 1/4 inch jet rods and goughing rods.
Went to the welding supply yesterdayand seen a glove protector that I thought would protect my wires from the heat of the exhaust pipe and this is what I did. I wraped one shield around the positive wire and secured it with tie raps on each end and a radiator hose clamp in the middle, I cut a...
Mr Tim,
It starts great even in the cooler weather we have down here, they have 95 cranking amps each. I was going to do this as temporary but I think I am going to leave it that way and put 2 seats in the cab and a small console in the middle.
Thanks
I move my batteries ans slave reciptical this morning so I can patch the rotted out hole in the floor. I was just going to move the batteries but I liked it so much I moved the slave also and after talking to Csm Davis I think I am going to take his advise and add another battery and a 12 volt...