Search results

The one major change I would like to make on my A2 is that wheel well spacing. It's just short of 48" between the wheel wells, which means I can't lay 4x8 sheets in there. Bummer.

Nah. You'd have still metered it out to make sure. :D

Garwahl, if you are interested in fabbing your own, you might want to take a gander at this thread: http://www.steelsoldiers.com/showthread.php?106979-M101A3-Stakes I see possibilities there.

Yep. It won't track quite right if it's crooked.

Pic #2 - looks like that receiver tube is a bit crooked.

Very nice. :beer: And Justin, take note. I didn't have to clutter up the forum with a repeat of his entire post in order to reply to him. Editing is appreciated. ;)

I do that, but without pivoting. I just set the hand brakes and jack up the tongue. Works fine, and no risk of breaking the pivots. Just gotta watch the clearance for the lights in the back.

Good news! There is no 24v wiring on these trailers. :) It's just wire. It doesn't care whether you put 12 or 24 volts on it. It's very easy to swap out the big fat military connector for a standard 7-pin RV connector, and you can just swap in standard automotive 12v bulbs on the rear...

These trailers do NOT have a dump bed! This has been gone over many times here on SS, but here's the bottom line: The pivot feature is there so that the tongue can be dropped down to facilitate storing or shipping a lot of trailers in a small space - they drop the tongues and nest them...