Search results

If I were a betting man I would bet on that head needing 2 valve seats and 2 valve guides and both valves for that cylinder for a start. Hot tanking over night will remove the molten aluminum from the ports and manifolds. That head will need some machine work and the injector replaced! Don't...

Do Not Use Toilet Paper For Filters!!!!!!! If it seems like I'm yelling at you it is because I am! Use only the recomended filters, NAPA carries them usually. Trust me that injector is junk and may have caused the problem in the first place, it got way too hot. Pull the pan hose everything out...

Gonna need a new injector and I would not be suprised to find a cracked valve seat or 2. aua If it were me I would replace the rocker arms on that cylinder also (probably tweaked) and keep an open mind about finding a new head. Denny

Diecorpse, You may want to send the heads out to be checked. with a piston that melted your engine saw a lot of heat. 1. Have the heads deck checked for straitness. 2. Have the valves removed to make sure none of the seats are dammaged. 3. No warped valves. 4. No sticking valves or bad guides...