Search results

I think it is pretty cool, can't wait to use it some more. I think it just takes a little time and some patience and some help.

I think everything is working as designed. I bypassed the switch, pushed the X-C button aired down to 35psi then pushed the hwy and they aired back up to 60ish psi. It took a while to air them back up but it seemed normal since these tires hold a large volume of air. If I can get that switch I...

Here is a few pics of the pressure switch (I think that is what it is) and one of the truck I will get some better ones later. It is the switch between the wet tank and the ppv.

I am terrible with computers, I will get the wife to snap some pics and help me post them.:-D

I had it at about 1500rpm for about 10min and it did not gain any psi, the gov kicks the compressor off at 135 so that is good. I will get a pick up soon thanks

I took the valve core out of the stem on all wheels no leaks so far. I can get the tires to deflate from hwy to sand and the light will stay solid on the sand mode but I can't get the tires to inflate from any setting. On the wet tank between the ppv and the tank there is a pressure switch that...

OK I think we are making headway, thanks to every ones help, I bypassed the filter under the dash and the system started checking pressure around 120psi, but the wheels have a Schrader valve in the stem. Will the ctis work with this extra valve or not I am guessing not.

I have tried to check the pressure and nothing, can I just unscrew the stem cap and check it I guess if it starts to blow air then there is no Schrader valve. I'll keep working on it and let you know thanks for the help Wes

I found a few leaks and fixed all of them but one, there is a inline filter under the dash that is leaking out of the bottom drain. I pulled it off and cleaned the rust out of it and reinstalled it, still leaks a little. I think the rubber diaphragm is shot. I don't think it is leaking enough to...

When I switch from hwy to any other setting I don't hear any clicking sound coming from the valve control I am thinking that this might be the problem. Would there be anything else that would cause it not to click other than it being bad?

m923a2

Just picked up my new to me A2 yesterday,(this thing is going to be fun, a few neighbors almost ran off the road looking at it) I hauled it home since it was a 200mi drive. It seems to be in pretty good shape with just a few problems. First the compressor seems to cycle a lot, it goes up to...