Search results

I've avoided the stainless steel because of that risk. I was reading in a couple different places (from people smarter on metals then me) that if you only use 12V it won't release the toxins because stainless steel requires much higher heat to release them. Not sure on that so I avoid it...

I left this one in overnight about 20hours total. This is when I pulled it out today. After a quick rinse. Few seconds with a wire brush. Took it inside and after less then a min on the wire wheel. This process is good if you don't want to risk any damage to the metal. Also I'll use...

Added 5 gallons of water from the hose and then added 1 tablespoon of Arm & Hammer laundry soap per gallon of water. Many people will use different additives but I've found this to be the safest to the part and to your skin. Most of the other additives used are an acid to begin with and can be...

I've searched the site and have seen a few post with different members talking about electrolysis and with links to other sites. Well I've decided to post up my small setup with some pictures and show what it can do. Here is the basic setup using a 5 gallon bucket and rebar for the electrodes...