Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Finally got my winch setup installed. Front bolts are 1/2-20, with lengths of 1.0", 1.5", and 2.0".
Oil capacity of the reservoir is approx. 7.25 gallons. Hydraulic filter is a Fram C1666 or Wix 51467.
Specs on the 2 hoses going to the winch from the valve body are: 91" in length, 3/4"...
Got around to assembling everything onto my new rebuilt winch today. Have a question about the winch input shaft and the parts that connect the pump to the input shaft. I understand how the woodruff key works, it is definitely not a shear pin.
Is the gold pin that goes thru the input...
tobyS, your pto's look skinny. I will probably buy one from you soon, I have more than one truck. An additional 1/2" will affect it, but I believe the pto will still install with the 2 toolbox/step support bolts removed. Will check what clearance I have and report back in this thread.
Please...
I would like add to this thread with my recent winch install on my M923A0. I installed everything but the winch, frame extensions and pto in about 10 hours. The pto itself took about 7 hours, with a transmission oil change also done at the same time.
There are definitely 2 different styles...