Search results

Yes, it will keep your hands clean, as long as the fueling nozzle grip is somewhat clean.

Way easier than that. Pull the center pin and because the arms lock closed over-center, they spring upon release and pop right off, so by pulling the center pin, the entire cap comes off and is dangling in your hand by the center pin. This is how your hands stay clean. You don't have to touch...

You'll love it. Hands stay clean.

Not sure. Difficult to tell on 4" pipe, and I don't want to guess and be wrong. All I can say is the brass ring threaded on very well, I used sealant with it, and the entire thing seals up very nicely.

FO Bro!!! Thanks for the help last night, could not have accomplished all we did on the 9 without you. Welcome to MI, we're lucky to have ya'. You'll run out of fuel in something you drive one day, and you'd better do all you can to make sure I never find out about it!

It is a 4" pipe thread, so it will fit anything equipped as so. If one had a short piece of 4" pipe with thread welded to the opening of a Deuce tank, it would work.

Google 4" EVR, and it will show up. I did a fuel tank upgrade at work, so this was headed to the scrap pile. Looks like the brass ring and cap are $40 each, but if somebody drains your 81g tank at $4/gallon, or pours something into it which shuts you off in the middle of the road, it becomes...

Quick latching and locking fuel cap. This is the fill cap from an above ground fuel storage tank. Has a seal, is quick to remove/install, and has a locking provision. ANS Distributing is one company which sells these. Select tank valves, fittings, and accessories, then top seal fill caps...