Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
RE: Another thing you can do with A/W crane mounted on a m81
my pushbar is 107" ,made out of 1 1/4 pipe, i store it on the spare tire side of the boom in 2 holders that i made out of 1 1/2 id pipe, as i said it is not the exact length needed but close
RE: Another thing you can do with A/W crane mounted on a m81
yes, thats how you do it, to retract ,pull the pins, then use the block to pull the end extension in, the tm-10 (iknow that you have that) calls for a 3 peice setup, i made a 1 piecer , lighter and easier, ill go out and measure, i am...
RE: Another thing you can do with A/W crane mounted on a m81
the 246 and the 819 donot have the throttle compensater that the 543,816 have, you have to set rpm, no clearance issures if you TAKE OFF the stop plate, are you useing the pushbar to extend the end section, pm me you phone number ...
RE: Another thing you can do with A/W crane mounted on a m81
no, need a driveline and the lower mounts( i have a extra set of the upper main mounts that i am going to make into a set of lowers), next time im home ,i hope to take it down to the driveline shop and have them make me up one
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!