Search results

I pulled two sets of manifolds today and they both had issues. One had a crack on the center section and the other set looked great until I separated them and noticed it had sealing rings on the male ends and the female ends were sleeve repaired. I heard this was only done for a few years and I...

Thanks for taking time to share how you did this. I will be looking for an intake manifold like this one. My turbo will sit higher and closer to the block so it would be a short straight shot across. Still debating on the air filter, but leaning on mounting to the passenger side of the tire...

I will be pulling the exhaust manifolds off the parts truck on Monday. Probably take the oil lines and flexible 5" exhaust line too. The parts truck has a huge liquid intercooler which I don't want to mess with. I am curious what your new intake manifold looks like jdknech. I am also curious to...

I saw the job that M215 did adding the turbo to his M813, we should hire him. He made it look easy under a narrower hood. I am thinking about pulling the heater box and heating the cab with a 24V instead to make more room. The tranny filter underneath could be moved to the frame below and to the...

Thanks Powerstroke. I received the turbo today very well packaged and preserved air tight with an oil film. This is a serious contraption and heavy! I read the warning from Borg Warner about FOD ingress being the most common cause of failure. They also warn about loading the housing and causing...