Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
1. Remove the wires from the glow plug tabs. Check the resistance of each glow plug from tab to ground. The reading should be around 4-5 ohms. If resistance is higher or infinity, the glow plug is bad.
2. With the panel switch in the preheat position and with the wires attached to the glow...
A "good" glow plug will read around 4-5 ohms from tab to ground. I would test the new ones and the old ones. You can test them in the generator by removing the wire and checking ohms from tab to ground. I would use sandpaper to clean the tab. Most are rusty. The "click" you hear is the glow...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!