Search results

I pulled it off. The front half inch with the teeth section is sheared off. I don't know if the pump is seized up or the shaft just gave out after so many years. I found a new shaft online it was 55 bucks. I will see if the pump still spins and go from there. If it spins I may send it for...

I opened the window on the side of the pump to see where the mark was before I took the pump off. I spun the engine and the pump does not spin. Maybe a broken shaft.

I guess I will have to stop being lazy and pull the pump. I have a local guy who is pretty reasonable on rebuilds. I was hoping it was something simple like a stuck lever or something.

I guess I will have to pull the pump. Do I have to mark timing before I pull it off?

The fuel solenoid functions. I opened the pump up. When I manually retract the arm that the solenoid normally retracts, the spring loaded part does not move much. Here are some pics inside the pump.

It is. I am leaning towards a fuel shutoff issue. The tm diagram I found did not show the 24 volt solenoid inside the pump housing. I don't know if I would want to rebuild it myself. The whole gen looks like it was gone thru in 09. I am leaning towards the shutoff being the issue since I get...

No one has opened the top of the IP?

I have 24 volts at the contacts, fuel to the pumps inlet and a verified clear return line. I did all the basic stuff. Has anyone had any experience opening the top of the pump. I dont want to inadvertently screw something up. The pump isnt cheap. Will

I have a MEP-006a 60kw gen. I have used these gens before without issue. I just got this one and cant seem to get it going. New fuel filters installed, I get good fuel feed to the injection pump but none into it. This pump has the internal fuel solenoid and there is 24 volts to the contacts. The...