Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I got them from 3 different places. What one I got from where? I have no idea. They all look the same to me. Had it out pulling old buses out from the back of a barn where they been for 20-30 years. The guy was amazed. Got one picture of where they where but the rain came and did not get...
Re: RE: Re: hot hubs
I made a thing that bolts to my trans. jack that holds the drum/hub on it with the wheel nuts
I should have taken a picture of it.
hot hubs solved
:D
You would not be leave what I found. Was not the bearings. ( I have some good used ones)
How many times do you buy a seal and if it fits, it must have been made right.
Well ( not saying that it was made wrong OR where it was bought has bad new seals)
I think it is just...
again
I changed both bearings and races. Took it for a 5 mile ride.
THE SAME THING !!!!!!!!!!!!!!!!!
Ok, what next? May be the seal is to tight? I am going to try to shave some rubber off the
seal. About 1/16" . As far as being bent I don't think so. This all started after I repacked
the...
It does not look like the race has been spinning on the axle OR the hub. Never noticed the temp. diff. before.
( i have a habit of checking hubs because I realy dont want to have to change axles ) Now that I got the son off to collage I
can spend time on this. To day I am going to get a socket...
the book
I finely got time to sit and read. Here is what the book says. I did this to all 4.
I'm not sure if I got it to preload setting. Have to get a socket to fit the nut and my torque
wrench.
My $0.05 worth.
Matt
I greased the wheel bearings this year and only have 1 driving me nuts. The left rear rear.
All the others just get warm ( all truck hubs do when there run ) but this one get really warm.
To the point where you can not hold you hand on it. Took it for a short ride and noticed the flange end...