• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. J

    PU798 MEP-803/ M116A3 towing questions

    Yeah, yeah and the photos...
  2. J

    PU798 MEP-803/ M116A3 towing questions

    Just wanted to thank everyone now that I am back home and am a little rested. I estimated high on the diesel and what I bought was only $2.41 - 2.59 a gallon as I made sure to fill up where it was cheapest. Total fuel cost was 149.00 I needed two quick links to get the chains hooked up and the...
  3. J

    PU798 MEP-803/ M116A3 towing questions

    What does reset mean for everything besides the engine? Anyone know the test protocol and how they decide what gets replaced? In regards to the alternator, is there any special test or are those remanufactured as well?
  4. J

    PU798 MEP-803/ M116A3 towing questions

    It was reset in 2010. Currently 11hrs on remanufactured engine but most I see are like that (reset).
  5. J

    PU798 MEP-803/ M116A3 towing questions

    Thanks Mike. My trip is going to be 1200 miles round trip but worth $220 in fuel for what I paid and got:) Any idea how high the hitch was from the ground on your rig? How many hours on the generator?
  6. J

    PU798 MEP-803/ M116A3 towing questions

    I found a pintle hitch at my old mans which puts the bottom inside ID at 20" off the ground, and I think I might roll with that instead of buying new.
  7. J

    PU798 MEP-803/ M116A3 towing questions

    Thanks for all the help everyone.
  8. J

    PU798 MEP-803/ M116A3 towing questions

    Can anyone confirm the inside diameter of the lunette ring on these trailers? The hitch I want to have expressed shipped by tomorrow says it works with 2.5" and 3" ID lunette rings.
  9. J

    PU798 MEP-803/ M116A3 towing questions

    Think I will order 2-5/16" because I have another trailer that size. They must make the inside space the same on both. I will take some power tools just in case since I will have plenty of power:)
  10. J

    PU798 MEP-803/ M116A3 towing questions

    It would likely rip off the locking mechanism of a standard hitch if it was down.
  11. J

    PU798 MEP-803/ M116A3 towing questions

    Do you know if your ball is 2" or 2-5/16". I dont know if it matters because they likely space the area for the hook the same on both. I could be wrong..
  12. J

    PU798 MEP-803/ M116A3 towing questions

    And the guy said I needed a drop pintle. I would say at 25" you need raised unless your truck is lifted. My reciever is 17.5" to center.
  13. J

    PU798 MEP-803/ M116A3 towing questions

    Will this type with a ball work? The kind I have seen before didn't have an actual ball. This one states 2"
  14. J

    PU798 MEP-803/ M116A3 towing questions

    Thanks, it makes me feel less stressed. How fast do you pull them and do they track well? Are the tires run flat, tube or tubeless? If anyone has one of these trailers sitting level and can get me a hitch height, I would be very appreciative.
  15. J

    PU798 MEP-803/ M116A3 towing questions

    Finally pulled the trigger on a sweet 11hr Generator and now planning for the long road trip. Does anyone know the interstate highway laws along the east coast for towing these trailer (RT95 Carolinas to MD), or RT81 are possibilities. I highly doubt most people have tags on them to transport...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks