Search results

Started it up today, ran for ½ hr. shut it down would not start again. I checked the linkage on the IP and the shut off solenoid, all was working and did not make any difference, still would not make any smoke. I waited for another ½ hr. and it did start then. I bled off the 3 fuel filters all...

Ran the gen today for ½ hr, shut it down and tried to restart again, no smoke. Put jumper wire on the temp switch, no help. Waited ½ hr tried again still no smoke. Waited another ½ hr it started right up. Shut it down right away and it started right up again. The problem with the PRC gage seems...

I looked for wirers that could be shorting and lose connection’s. Did find one lose wire screw. Blew it all out and started it but still showed PRC 50% . Let it run for awhile, and the more it ran the lower it got, in about 30 min it came down to PRC 0 to 10% and stayed there till I turned it...

Will heed your advice and try not to get fried checking it out. I will let the group know what I find out. I ran it last night and did not see any sparks. Thanks to everyone here at Steel Soldiers for your selfless support.

This is my first mep003a, has 1200 hr. would not start. Looked like the injection pump was not working so took it apart cleaned it up, all looked good inside put back on and would not start. When I tried to start it just got a little gray smoke, but would not fire. Then it hit me the valves are...