Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I need to get off my butt and get these things built. I just finished looking at all of the great photos from the rally in GA. I was at the end when I realized that I wasn't really looking at the vehicles, I was looking at the shapes of the bows. :shock: :shock: :shock:
Smitty
You might be right. I went out yesterday and checked them against my side racks and they are the same width and thickness. If I get a chance, I'll drive around the base to see if I can find a trailer with the bows installed and compare.
Smitty
Re: RE: Re: RE: Received My Metal Bow Corners
Am I sure I have the right ones? No. Are they going to go on the M101A1? Yes, even if I need to modify...
The inside diameter is around 1 5/8" x 1 3/16" ( I say "around", since my eyes aren't as good as they used to be...) I get 16" when I...
Re: RE: Received My Metal Bow Corners
Sorry, brain dump on my part. The trailer is an M101A1. My bow corners are a little different than those that you have pictured. I planned on using wood for the top cross piece and the down piece. Now I'm not too sure if wood will work for the down...
I have the metal corners for the bows, but I thought about something else as I was looking at the trailer. Do the bows have some type of metal shield/support on the bottom where they slide into the slots on the side racks? If so, are these available anywhere?
Smitty