Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Not yet, these are hella expensive and I'd like to eliminate all other possible problems before going there.
It would be neat if I could test using a known 'good' one. I would hate to rip this up by going with a manual set up..
Pointman
Here is the sad part.. Upon start up, I get around 130 psi at the gauge. After its warm, it settles down to around 120. The pressure switch is working and clicks on at 120. I'm still getting 5 flashing lites on the controller..:whistle:
Pointman
In the process of trying to diagnose CTIS issues, I decided to install a small air pressure gauge to find out just what the **** was going on in my wet tank. I drilled and threaded the elbow coming out of the tank (after disassembling the regulator), and used an air gun to remove any latent...