Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Engine block ground wire is pretty weak since the block grounded loads are small to none. If you are upgrading the alternator output, best to run both alternator + and - wires back to the starter + and - terminals, since these are heavy cables back to the batteries. That is how todays over the...
Yes it will fit and work, the alternator is just flipped over. J-180 defines an SAE mounting pattern. The only difference is the 250 engine requires a double v belt pulley with more standoff to it or to shim the alternator forward like done here. The 8.3 uses an 8 groove with no additional...
First off, get the best deal you can for what you want. I could buy $89 Chinese Delco clones and resell them to you for the 250, but you guys can do that yourself without a markup. So instead, I bring over 24v high output 130 amp non-Chinese units from the European market where they utilized...
I didn't sell SD that alternator, I just advised him about it and fitment/wiring/etc. He was kind of surprised I talked him through it even though it didn't come from me. I don't really care, mine are pricy and I don't blame people for going elsewhere to get a better deal, we all do it. The...
Nice thing here about changing to any alt besides the mil one is that it will not over-volt on an "incorrect" shut down procedure. You won't zap your ABS, PCB, or anything else that has letters in it. The alt above can be ran as a single wire unit, meaning it just has a single large red...