Search results

The MEP903 lug diagram makes this even more confusing. The way I read the diagram is that you can strap it for 120v OR 240v, but not both at the same time. It's back to what does the shelter need.

Yes, that should work. The trick is to make sure you get the right wires from the twist lock plug to the right lugs (L0,L1 etc) on the shelter. You might PM quickfarms to tell you which lugs on his generator provide which voltages. Normally in a single phase set up, you will have 240v across...

From what I could find in a quick search, the MEP903 output is 120/240 three (four if you count ground) wire single phase (I could not tell the labeling on the photos that were posted). That is the same type of power you have going to your house. There used to be some postings on the internet...

You should be okay using the same L0, L1 etc connections. As others mentioned, make sure you ground the thing and check the total amount of power you plan to draw in the shelter to make sure the MEP-017A will handle the load, especially with the heater on. I have several MEP-017As and can...