Search results

Sorted out my problems.

Replaced the starter over the weekend, that sorted out.

Yes, understood. I have the panel the relay is mounted on removed and sitting on the floor. Those terminals are covered in liquid electrical tape, and are most certainly not touching anything. I'm fairly sure that isn't the issue. It may be the wiring too those terminals, but I'm not seeing...

Checked the relay, don't see any issues there. Checked out Gen 2 with my multimeter. The isolated ground appears to still be good. I'm thinking now that it is the starter. Had issues with this starter before so I went ahead and ordered a replacement.

Thank you. Slowly went back and checked the fusible links off the buss bar. Found a failed wire by pinching them. Replaced the fusible link with the same spec one(had to go to two auto parts places to find the right one.) Replacing the fusible link caused the instrumentation to work, and...

I have a 86 M1008 which is my daily driver. About once a quarter it surprises me with a new problem. Last quarter was a leaking heater core, today it wouldn't start. Or, more accurately it started right up, ran for 1 second, stopped, and wouldn't start again. Smoke was observed leaving the...