Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I dont know if the inside is threaded or solid or??? If he could not turn the center any more, he could have unbolted the inside of the radius rod and turned it that way (the ends turn independent of each other if one is bottomed out).
Try to look through the gap in one to see if there are...
They should have given you an "after" printout too but since yoh didnt pay i dont know.
Each of your readings is the big number. It should be between the two small numbers in that black. The arrow shows where you fall. The "x" on the toe means you are out of range. Tires can easily be chewed...
Is that before or after the alignment? Ah, I just read this in the other post....I hope you didn't give them any money ! Don't replace parts because he says they are too short or too long. And, as for paying for an alignment on these...the shops are supposed to be paid by the hour for these...
Removing and adding shim is called an alignment. The tire shop did mine on the rear as if it were at GVWR, so I will have to remove some shims. There is a chart in one of the TMs that tells how many degrees it will change for a certain thickness of shim.