• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    There is a diagram in TM-2320-280-20-1 unit maint. in the steering control system section
  2. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    Verify and double verify the plumbing is correct, anything hooked up wrong or backwards in the system will cause this problem, however, in my case it was a faulty component (cadillac valve).
  3. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    Yes, didn't see any other way. I labeled or color coded everything I removed, which helped when putting it back together. If any of your cooler hoses show signs of cracking or age, it would be a good time to replace. At the advice of Infidelgotme, I double clamped all the cooler hoses when...
  4. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    After replacing most everything in the system ( lines, cooler, Cadillac valve, temp sensor, time delay module, PS pump, fan clutch 3 times , it ended up being Cadillac valve. The second NOS unit fixed my problem . I have a good sized area in and around my driveway grass will probably never grow...
  5. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    Yes I changed out the pump with a NOS unit, but the problem persisted prior to the pump swap. I was hoping the new pump would have fixed the problem, but no
  6. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    Today, I plugged the line from the Cadillac valve to the fan clutch. Performed the TM method of bleeding the system ( just to confirm no air in the lines) Cranked it up and immediately a rupture occurred in the line from the Cadillac valve to the cooler. PS fluid sprayed from here to kingdom...
  7. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    While contemplating my next course of action, I disassembled the original fan clutch expecting to see a bad o ring or ???? But the 2 o rings on the spindle and one o ring in the dust cup look to be okay. Nothing to implicate why a deluge of power steering fluid would blow by
  8. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    I will look into the pressure tester. I don't want to end up with a garage full of formerly NOS fan clutches trying to overcome this obstacle
  9. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    Confirmed visually
  10. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    Arrow points to where the PS fluid blows out, behind dust cover
  11. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    Yes, same ports they were removed from.
  12. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    Negative! No foaming over, no milky looking PS fluid. The fluid is blowing out of the fan clutch
  13. General Hood

    HMMWV Fan Clutch Demons - Please Advise

    I had posted a while back that my Cadillac valve was not functioning so I bought a NOS replacement from a fellow SS member. Once replaced and system bled, upon start up the fan clutch blew PS fluid everywhere. I replaced the fan clutch, bled the system and again another fan clutch sprays PS...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks