Search results

I had replaced the temp switch. The main problem I was having is 24v going to plugs full time (when engine is not running). Bad box. Reporting back, the block heater works great! Keep in mind it was 50 degrees this morning so not cold. Had the heater on 2 hours in advance with a timer, 1000w so...

Yeah, I remember seeing it on Ebay for like $600. Everybody says it's the best. It's the KDS S3 right? So many parts and names for the same thing, difficult to keep track.

Tony, ponied up on the big box huh? How much? Tried the block heater with the plugs not working last night, fired up not too bad. Going to get a timer and run it 3 hours ahead for early wake up tomorrow an see how she does. Will report back. As far as boxes go, I think I will just opt out...

Had a second today after doing coolant flush, replacing all hoses, thermostat & installing block heater. Tested glow plug lead (only 1) and found that it's getting 24v when key is in the on position constantly, regardless if coolant is cold or hot and stays 24v after the light goes out. The...

Tonydamato, Sounds like it could be a grounding issue to your starter.

Thanks for the feedback. The former owner had switched out the plugs just prior to my purchase. He said they were swollen and difficult to pull. I had tested a few of the glow plugs in the block and they measured at 1 ohm, which looks to be good. My wait light is staying on for 9 seconds, so...

I know this is the most posted about problem, but I'll give this a go anyway to see if someone sees something I don't. I've been combing through the forums and the service manual. Cold start issue only in the morning, no other time. New glow plugs were installed, as was a grounding harness...