• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. W

    Fan won't return to normal speed after coming on and after temp falls.

    thanks for the reply! yeah the solenoid was showing about 71 ohms across leads when disconnected from the TDM. i did not run the lengthy resistance tests the TM lists for TDM testing, but the failure of the thermostatic switch to close after opening (past usual closing temp) seemed pretty...
  2. W

    Fan won't return to normal speed after coming on and after temp falls.

    update; fan clutches in fine while idling if i break the circuit at the thermo switch. i did a resistance test at the solenoid connector pins via instructions in a troubleshoot TM. it was easy to do so i checked it. GTG there. next i let the engine warm up and then pulled the throttle...
  3. W

    Fan won't return to normal speed after coming on and after temp falls.

    Been driving my m998a1 since august last year, the fan cooling system has always functioned correctly. I'd say it comes on around 215 and goes off about 190-200 degrees after running at engine speed for about 30 seconds. (on hot days at 55mph this cycle repeats every couple of minutes). The...
109,080members
164,129threads
2,309,528posts
1,132online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks