Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
It’s been discussed on here in the past that the hubs may not be a true 2:1 ratio. A year or so ago I did a test where I put a degree wheel on a hub and rotated the drive to see what the true total reduction was. Hubs and diff and just hubs. But I don’t remember all the results, it’s posted...
Now you really got me thinking and a re look at the parts. Ok power comes in and drives one of the big gears. This in turn drives the 4 smaller gears on the cross. Now the cross is fixed to the hub that and provides power. The second big gear is fixed to the spindles with splines and does...
Look at it like this. If the input gear, the top one is different in diameter than the output, then how would the spider gears mesh between the two. They are on a fixed diameter. Adding teeth to the input and not the output puts them physically out of alignment. The only way to change gear...
Here is a photo of the reduction gears in the hub. Reduction is due to the ratio of the spider gears to the input/output gears. To change the reduction you change the spider gear size. The top input and the bottom output gears have to be the same size or it all bindes up. Without a complete...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!