Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I had to dig into my stash and unbox a GM circuit card. I slipped it in the box and turned the key. Clunk the glow plugs solenoid engaged and cycled. I started the M1009 and checked the lower stud on the relay. It cycled 4 times and shut the glow plugs off. Happy Happy. The shift selector...
Still wondering what that thing is on the injection pump. Does anyone know a good part number for a fast idle solenoid? The GM part number is discontinued.
After long thought and 9 hours on my full time job I was able to come home and solve the problem. I think the initial problem was all the hacking that had been done to this poor Red Devil. I had pulled all the glow plugs tested them and reinstalled them. The relay on the fire wall was...
I clipped my test light on it and checked all the fuses for power. I just have it clipped on and the test light lights. I think that means I have ground. I agree that it is strange. I changed the glow plug harness and still have the same symptoms. Now I don't feel bad when I say my new truck has...
That would be too easy. I have the cluster out and everything working on the cluster. I replaced the star washer and bolt on the ground at the E brake. Still no joy. I removed the glow plug relay from a running CUCV that operates perfectly installed it and the relay will NOT engage. I have 2...
:)I can do that I think. I also have new cards with fancy lights I never used. :)I could always put one of them in if you think it would be safe to do so? Well?
I have it mounted on the firewall. I had these HD relays on several CUCV's in the past. The metal body of the relay is mounted in fresh drilled holes with new screws. Anything else I can check? Also the volt meter just pegs itself when I turn the key on. I guess I must get the fluke out. Does...
I am at this point with a truck I am working on. Everything is wired stock but I can not get the relay to clunk in. I did a visual of the glow plugs. They are all good. The wait light comes on but the relay does not close. I swapped the relay same results. I started with just Gen 1 light I found...