Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Sending a big thanks to 86humv for getting me straightened out on this. Sorry I do not have the part numbers but I did take measurements with a micrometer for the parts that you need for this to be correct see pics
Yes that is a picture of mine if I remove the washer I am pretty sure the cotter pin will go in BUT NormB sent me pics of his with the same setup and his not only has the washer his also has the 3/16" thick spacer plate between the cone spacer plate and the bumper center brackets
here are the...
Thank you . I spent some time measuring some items with NormB and the vendor. The pintle shanks appear to be the same length as well as the distance to the cotter pin holes and the height of the nut. NormB removed his pintle and measured these items today he has the A2 bumper with the...
To try and not not make things to confusing I recently upgraded my M998 from the 3200 lbs towing MWO to an A2 air lift rear bumper with the big reinforcement plate using inner mounting brackets.
My issue is I am not able to get the nut to go on the pintle shank far enough to get the cotter pin...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!