• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. tktsales

    My MEP803A permanent install

    I installed this flexible pipe section to my exhaust over the weekend and I was a bit surprised. I use to have a little rattle to the rain cap anytime the set was running. It wasn't bad but a little annoying. That is gone now so I guess it was well worth the $50 and 30 minutes of my time.. I put...
  2. tktsales

    My MEP803A permanent install

    I did see those after Chainbreakers post and went looking. I will review the placement of my pipe and might revisit this exhaust installation in its entirety.. Thank you for all your suggestions..
  3. tktsales

    My MEP803A permanent install

    The problem I ran into is the corrugations in the roofing metal do not allow me to use something like this. I am sure there are specialty ones available and I will look around more.. If I could get that to fit my roof it would be worth the money..
  4. tktsales

    My MEP803A permanent install

    Well guys you got me thinking and I think I will give it a shot and maybe I can seal up that leak in the roof with the addition of a flex pipe.. I found a 12" 1-1/4 NPT flex pipe at MSC for $48 my cost (made in China of course), I ordered 2 as I will be installing another unit this summer in...
  5. tktsales

    My MEP803A permanent install

    Its not a crazy amount of vibration but yes it is solid piped and I know the risk.. Its a rig job to begin with, From the muffler I am using an NPT coupler to a thin wall EMT electrical conduit. I just half-arse tapped the ID of the conduit to accommodate the NPT tread. It keeps the weight down...
  6. tktsales

    My MEP803A permanent install

    I have a rain cap on it, I tried to use some Fire rated caulking to seal around the pipe thru the metal roofing but there is too much vibration and it did not hold, I might try to find a boot but I don't know if it will take the heat. There is enough pitch on the roof that it does not leak too...
  7. tktsales

    My MEP803A permanent install

    Ok guys so I have installed the remote start from Kurt Klopp. It took about 2 beers to install (an hour for those of you who don't know how to tell time that way). Some of that time was spent searching for a 1/4 drill, The last guy to use it never put it back (me) and I never did find it. Anyway...
  8. tktsales

    My MEP803A permanent install

    I have a Wifi controller on order from Kurt Klopp. I should have it just in time for the weekend and I will report back after install. I expect it to be a huge benefit as my set is about 100-200 foot from my front door and the power never goes out unless its doing something really ugly outside.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks