Search results

Ok thanks. Now I understand.

Hey thanks for the tip on the voltage regulator. The one I found was for the 400hz 005. Still looking for a spare. If I can’t find one I have a friend going to the states in Jan that can take my exciter box to the states to get repaired What does UOC stand for. Thanks so much for all your help!

In the parts Tm number 76 is nsn 6110-00-363-3973 or 3974. How do I tell which is the 50/60 hz version. By the usable on code? Where is the key as to which code is which version of the generator? Thanks so much for pointing that out!!!! Is there a separate Tm book for parallel operation or a...

Hi guyfang, I just bought another non running 005 and the seller is removing and shipping me all the electrical boxes, transformers, front panel gauges and switches, wiring harnesses, Injection pump, alt, starter, muffler for spares. I also want to repair my exciter box so I have a spare one of...

We after closer examination found that the CR 16 & 17 are damaged. The outer body is cracked an missing almost half of the outer painted area. Do you think that might be the problem? Are they part of the exciter circuitry? What additional testing equipment would I need to test all aspects of the...

Anything in particular we should check in the exciter box that is problematic? Thanks again for all your help

Hi guy. My error. I thought the status exciter and voltage regulator assm box was the s/p box. The exciter box is the box we installed in another generator that was working properly. When we installed it that unit would not make electricity. We we reinstalled the units exciter box it made...

Here is what we did, we put the s/p exciter box into another genset and now it won’t make power-nor excite the generator. We swapped them back and it is making electricity. So the problem is definitely in the s/p relay box. Any idea what in the Box might be the culprit? Thanks so much for your...

We put 24 volts to the exciter circuit today and the generator made 220volts. So the generator is good we aren’t getting 24 volts to the exciter where the two exciter wires go into the two wire bulkhead connector just above the generator head we have the box out and have inspected it...

How many lots should the start switch send to excite the generator 24 volts? Or less. ? Thanks

Hi guyfang, I read the Tm. The current transformer number 40 with the single hole in it only comes into play during parallel operation evidently. I repaired the three mouse chewed cables in the unit I took the transformer out of to put in the unit not making power. Still not making power. My...

Wow this is really weird. The other mep 005 that came with my rowpu only has a few hours on it since the engine was rebuilt and the rowpu was serviced. The genset makes stable power and all the gauges seems to work but not sure on percentage of load guage as I haven’t run a load on it. I think...

Sorry tool so long to reply. Yes. It’s number 40 on page number 84 The number I posted is the number in the outside of the transformer itself I just got my parts Manual and see the NSN part number system Guyfang. I dont have much skill in electrical diagnostics and do not know how to read...

the Current transformer seems to be working properly tho as it makes 220v and 60hz if I hold the start switch in the start position. Thanks again for any ideas on what to look for

Delks doesn’t have the current transformer pn 30554-72-2230 Mine was melted and a tar like substance has melted into a pool around it. I removed it re molded the tar like substance and encapsulated it with JB weld to keep the tar from running out when it gets warm. I have four 005s I recently...

Delks had everything I need except the small current transformer. I am looking for another vendor that sells used parts for an mep 005. Thanks in advance for any info guys