Search results

don't run it anymore without the radiator working, you won't know it but you can scald the rings pretty quick without any coolant. I would get it all back together and then start it up and crack one line at a time and make sure the air is out of each line. if it is a fresh rebuild, it will...

what is he total run time. could just have air in the injector lines that need to be bled as far as the rough running. Hope it is not a bad IP rebuild, that does happen.

is it possible that you just had it flooded out running the starter a lot. have you let It run for a while to see if it clears up. you may have pushed a lot of fuel into the exhaust system that is burning off also and creating the smoke and smell.

I was in the same boat as you. I just went ahead and finished the motor and now I don't hear it because the motor starts so fast the starter does not run for more than a second. you might try the direct drive starter if you want. but for sure double check the bolts and bolt holes and also make...

mine was the same way. I was using the starter to circulate the oil and prime the fuel system prior to the final touches on the engine. I decided to quit worrying about the starter and get the motor running and once the motor turned over, the Bendix returned like normal and I have not had issues...

does the motor start? if it does not start the Bendix will not retract so don't worry about that part if the motor is not starting. if it is just noisy then let it be noisy until you get the motor running. I thought mine was bad but it was not, I was just laying next to it instead of being in...

I have not worked with this set up before but it should not matter. check the flex plate for warpage and also for more shims. how old is the starter, could just be a bad Bendix in the starter not pulling it back enough. One thing I do know, if the truck does not start, the starter will not...

has it started and run before. I had this happen to me and the flex plate was bad. it was warped. when you turn the motor over by hand you could see the flex plate walking back and forth. you were asked if it was a cucv and did not reply. a c30 is a civilian truck and we do not know what a...