Search results

A "Big" thank you to everyone that helped trouble shoot my Rocker Switch problem. It was suggested to disconnect each switch and run accessory to power. When I did that it was definitely a reverse polarity issue. Everything is now working fine.

I wired the USB Rocker Switch directly from fuse panel. The USB has 2 pins / Pos. and Neg. Very strait forward. Positive from 12 volt fuse box and negative from 12 volt fuse box The fans and the fog lights plugged into the cigarette lighter. I cut the male ends off and wired them as positive...

Yes, the switches are lit. When I turn the switch on they light / Switch off the lights go off. I tied 7 and 8 together because someone on this site posted a diagram showing them tied together. I have been on several other sites where all stated the same thing. I chose 7 and 8 for ground...

Side note ; Each accessory had a male adapter on the end that plugged into a cigarette lighter or female power source. I cut off the male end and wired each accessory accordingly. Could this have something to do with the problem as every thing was working fine when plugged into the female power...

Thank you. I posted problem under the electrical forum. It does not appear that the site gets very much attention. I will hope for the best.

# 8 and # 7 have been tied together. Here is the nominclature: # 8 tied into ground from fuse box. # 7 tied into the ground wire from the fan. # 7 and # 8 tied together with a jumper wire. # 2 tied into power from fuse box. # 2 has continuos power. # 3 tied into the positive side of fan. # 3 has...

I'm in need of some help in wiring a 5 pin Rocker Switch. I wired 4 switches in a gang box. 2 for accessory fans, 1 -USB switch, and 1 for LED Fog lights. My problem is that the only switch working is the USB port. Here is the nomenclature: # 8 tied into ground from fuse box. # 7 tied into...