Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
W
Wow that’s crazy! I wish I was better at understanding wiring so I could figure this out I’m hoping once I get the Dakota Digital rpm box the instructions will clear things up.
Mine is actually a 4L85E pulled from a 2007 2WD bus behind the Duromax. It has two sensors on the side of the case. Is one the input speed sensor and the other the output speed? sensor
Forgive me for sounding stupid but wouldn’t I need the terminal end that attaches to the alternator to run the wire to the Dakota digital converter box? I didn’t take the tach wire off the back of the alternator yet but it looks like a special type of connector. That’s why I asked if I could cut...
Kiethj
I looked at my truck my alternator has that exact wire that your pointing to in your picture. Do I just cut the wire at the harness? That won’t affect anything to do with the way the truck charges?
Barman Thanks! I never thought about the sensor leaking oil. I'm glad you mentioned it. I can get one from AutoZone my cost is 235.00 and then I have to worry about future failure and oil leak I'm going to look into the alternator tach signal and convertor box. I suck at electrical but I'll have...
I have been reading and searching just thought I’d pick some brains before I dug in. The oil pump drive with the engine speed sensor is expensive which I’d buy if someone could tell me if it would work. I even called MSD but the tech wasn’t very helpful. Im going to try again and hopefully get a...
Hello All
Can someone point me to a Thread that talks about different methods to pick up an Engine RPM Signal for the TCM on my 4L80E Swap? I have the MSD TCM already I'm wondering if anyone has dealt with this yet.
Thanks In Advance