Search results

Yeah I have to have a haglund deformity fixed and a Achilles detach and reattach done at some point but I don't have 8 months to sit around and do nothing

I've never ran more 60 or 65 gallons in mine. Mine runs at idle all the time when operating. I would check the fluid temp after running it hard. I only use 10wt since i could get it by the drum for $200

Yes because even if you need a hose in a pinch most places napa. O'Reilly parker etc will always have pipe connectors to crimp on not always JIC or 90s anyways. I always keep 2 spare reusable 3/4 hose to 3/4 pipe fittings with me and 10ft of 3/4in hose so I can fix a hose on the spot with a...

I I use the NPT on the hoses to get me to fittings for the JIC so it can interchange with other fittings say if some are 10s and others are 12s but the npt to JIC fittings are always 3/4 female pipe to be able to interchange

Better npt than inverter flare.

I always make all lines with 3/4" pipe on each end and buy fittings to get me what I need need get to so in the event I need to swap a line say from winch motor to the boom cylinder then I can sacrifice it and will interchange.

I remember cutting some at one point and welding A 3/4" extension to them and using the impact on it to remove one. I

These at this point? Get the boom up and out of your way. If you have a tree near by pull up to it. Rig your chain up as high as you can go with your snatch block. Run your cable from the front winch straight up up the block then back to the boom. Put the crowd out a little and hook your chain...