-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
M1078A1 driving me nuts (Very Slowly)
That would require the truck to be destroyed.- Mikes Bikes
- Post #17
- Forum: FMTV
-
M1078A1 driving me nuts (Very Slowly)
Update: Problem resolved - Pulled the feed line off at the tank (also removed the dipper in the tank) and removed the line at the feed side of the water separator. Blew it our from engine side to tank side with compressed air. Removed the fitting from the feed side of the water separator...- Mikes Bikes
- Post #14
- Forum: FMTV
-
-
M1078A1 driving me nuts (Very Slowly)
Mine runs great for a short time. It'll run right up to 70 MPH, just like my other A1's. Then, slowly loses power till I'm a hazard on the HWY and pull over. Sit for a minute at idle and she takes right off, only to repeat the same scenario. I'm thinking that at high power, the demand for...- Mikes Bikes
- Post #5
- Forum: FMTV
-
M1078A1 driving me nuts (Very Slowly)
Exhaust brake functions as it should. Turns on and off without issue.- Mikes Bikes
- Post #3
- Forum: FMTV
-
M1078A1 driving me nuts (Very Slowly)
I have a fleet of FMTV's A0's A1's & A1R's - All run great except 1. It's been flashed to 330hp and has 307 gears, like the other A1's in the fleet. This truck, runs great for about 4 miles, then slowly loses power. Pull over, shut it down, let it sit for a minute or two. It fires right up...- Mikes Bikes
- Thread
- Replies: 16
- Forum: FMTV