• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Keith_J

    M1009 crank crank no start

    Bending the finger forward could prevent shut off. Be careful. When installing the cover, it needs to be dropped in a forward position and slid back, this is what closes the metering valve. The solenoid is energized to run.
  2. Keith_J

    M1009 crank crank no start

    The pink wire allows fuel to be injected when 12 volts is applied. When 12 volts is removed, the solenoid forces the metering valve full clockwise. This valve is probably stuck in the closed position. Make sure the energized to run engine stop solenoid functions correctly, you mentioned you...
  3. Keith_J

    M1009 crank crank no start

    If you have fuel to the injection pump (IP) but no fuel at the injectors, the problem is internal to the pump. The fault most probable would be a stuck metering valve. This valve must rotate freely at all positions as idle speed is governed by a very weak spring which opens the valve, opposing...
108,866members
164,024threads
2,307,756posts
1,022online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks