Search results

Ray70 and other thanks for all your help. After putting the new wema fuel sender in and a new gauge that was still pegging past full when I turned the switch on and when off it would goback to E. I decided to put the old gauge back in and and try it again. And i will be darn it worked fine. So...

Thanks Ray I will check it out again. I may have it wrong at the new wema fuel gage. I noticed when I took the old float out one wire was mounted on the top of the float unit sending wire and other was ground to one of the screws for ground. I took the two wires from the float sending unit...

Hey Ray I che check all my wires on the gauge. The best I can tell the I terminal has 2 wires 137 H20 & 137 F20 the ground has 100AR and the S terminal has wire 128 B I am showing with the unit running the I terminal showing 27.6 v and the S is 6.8 v I'm not getting -12v on the G as you...

I just put a new wema 5.5 in the tank so it should be good. And the fuel gauge is new. So I have to check my wiring to the gauge. I can hardly see the numbers on the wiring to the gauge. Thanks

Thank you!

Thanks for the diagram I will definitely check it out!

I put a new fuel gage in and it pegs all the way past full. I also just put a new 5.5 wema fuel sending unit in and gauge still reads the same. Not sure what is wrong. I hooked the 2 wires up. Can anyone tell what I got going on. Thanks