Search results

Got the doors painted and second coat on body. Now waiting a couple weeks before I apply the marking labels

What are folks doing for interior lighting? The trucks are dark in there.

Yea, the front driver side flashing is a gap from the front. Rain will flow thru. My truck someone put a bit of foam in there. I decided to weather caulk that hole. I have caulked several gap areas. I am not real interested in being wet during downpours.

A couple of notes on door installation I have found. 1) drilling the bracket mount holes. It is dangerous to free hand drill because you have to go thru the door body and be in line with all three holes, or the backing plate will not line up with the screws. My low tech solution was to buy a...

My 1151a1 has those flashings as well. The doors seem to have some compression on the seal at that corner, but I had to monkey with the latch position to draw in the door.

When mounting the front plates I chose to trim that al piece to make a nice flat surface. On the back plates, the existing holes in the al were large so I had to use a couple of different size washers. The back plate slots are for 1/4in bolts. Would have been nice if they were 3/8in instead...

Hi, I bought a set of 4 from Kentucky. Good customer service. Doors seem sturdy, 1/4in thick fg and all standard fittings. I mounted them but presently painting the truck so not much usage. Interesting note, when closed it is almost impossible for my wife to open them. The latches are too...

got the doors today. fairly heavy. the fiberglass is about .25in thick. you can see the thickness in @jake20 pictures looking at the window cutout. Kentucky forgot to include one the hardware bags but Adam said he would get one shipped out.

excellent, thanks. I finally get my set tomorrow. the delay was because Kentucky put the wrong contact phone number and the shipper was calling it and not getting a response. so they held. anyway, straightened out and here tomorrow. I am still waiting on the 1151a1 so we will give these a paint...

I looked at those doors but passed because the windows are typical rv windows that slide fore and aft, and you can not drop them down to have a good opening. other than that, similar price, but AL. Other than that, look as expected for x doors.

As am I. should be here in a couple of days. I talked with a person there and he said when they paint, they first prime with interlux fiberglass primer, then DTM (direct to metal) primer, then carc. so that is what I am planning on doing. I will take some pictures of the process and report back.