• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    CTIS spewing gear oil but controller not connected.

    All the QRV's, the controller, the sensor, etc.. are VERY similar. The basic idea is trace the line back from the inside of the axle up to wherever it's mounted on the frame rail. The ones on my M936A2 are JIC fittings to the distribution block. Take the line off and plug in your "special" tool...
  2. K

    CTIS spewing gear oil but controller not connected.

    Because I'm working from a different truck. That said the systems are the same (or similar enough to not make a difference). Look at TM9-2320-272-24-2 section 3-462 "Hub air seal leak test". It's for the M939A2 series.
  3. K

    CTIS spewing gear oil but controller not connected.

    Make the tool from the TM and check all the hub seals. My bet is some are totally shot. I carry the test tool and a blank off cap on the truck so if one goes I can identify, blank it, run with 5/6 operation and hand manage the failed one. I recommend anybody that runs with CTIS operational do...
108,977members
164,076threads
2,308,635posts
791online users
Top