• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Redokie

    MEP-016B Field Flash Procedure

    Update: I got the engine dialed in and running like a top and attempted the field flash with a 9v battery. No luck. did some troubleshooting and discovered I have a break in the field stator coil windings. Narrowed it down to 1 of 6 of the coils and have removed the generator stator casing...
  2. Redokie

    MEP-016B Field Flash Procedure

    It is a PFR-1K, she was gummed up from sitting 15+ years but fired up without skipping I got the timing marks lined up on all 3 of the piston components. The outer liner has a small eccentric screw that had a plug over it. The throttle works properly but everything is shifted to a higher...
  3. Redokie

    MEP-016B Field Flash Procedure

    Ok, I’ll start with the D cells and work my way up till I see the desired output and report back. I have to rig and adjust the governor linkage. I rebuilt the injection pump and have to shift the adjustments towards the shutoff position. She goes to 60hz and starts to climb out, thought I had a...
  4. Redokie

    MEP-016B Field Flash Procedure

    Ok, I’ve located everything and familiar with the steps. Do I apply the full 28vdc? I have a variable power supply I can set the voltage and regulate the max amp output. thanks for your reply.
  5. Redokie

    MEP-016B Field Flash Procedure

    Anyone ever flashed the field on a -016B? I’ve worked on commercial 50KW+ units but they were automatic. I haven’t had to flash a field on a generator since A/P school. Thanks.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks