Search results

Thanks for the help Tktsales, I looked at the TX 200, and sizes and specifications for it, and based on the information I got, from many different sources, is that is it not the best auto to use in this application. I am still very weary of computer controlled transmissions, as I had some...

Thaks to all for repling, the info was helpful, and outside of M series, I have a working knowlege of old hydrolic automatic trans, HT 400, A 727, C6, AMX, TH 350 and have rebuilt several of each a long time ago, so that is why I am interested in the non computer controled trans, one I would...

Thanks cranetruck, I looked at the specs of the 3060 Allison, and it is an electronically controlled trans, which I am trying to avoid, also it seems pretty expensive, as such things go, so unless I find something great, I am going to keep looking in the older hydraulic type automatics, as top...

Thanks for your info tom, I am not very familiar with the 3060, what trucks did it comer in, and is it an electronic control or a hydrolic transmission? Also, does it have overdrive? Thanks in advance for any help. ALFA2

Thanks for your help cranetruck, I am interested in this transmission, to see if it will work in a M36a2, with an LDS 465. Also it is interesting to find out why they only used it for so few years, just too expensive, or did it have some unusual problems, that could not be fixed? Please let me...

Thanks for responding Stalwart, do you have OAL measurements of this transmission, or any other information about this transmission that may be helpful? Thanks Again. ALFA2

I just had a question, if anyone knows what is the overall length of an Allison TX 200-6 ( from front edge of the bellhousing/TQ housing to rear edge of the output flange) ? This transmission was used behind LDS 465-2 approximately 1969 +- Also, if anyone has one, or knows where a used one, or...