Search results

That might just be the way it is, I've seen engines that sort of fire up a few cyl at a time. I grew up on a farm, at least ya don't have to belt it to something else to spin it fast enough to start. LOL James

temp readings Hi I rolled the MEP002a out of the shop about 11:00 am & took readings. engine temp 49°F primed fuel system, it only takes a couple of seconds for my fuel pump to slow down, when the jerry can adapter was sucking some air it took quite a while for pump to get slow. Preheat 30...

Hi Carl, I hose clamped a temporary piece of clear hose in my supply side to check for air leaks in. I found my MFC adapter sucked quite a bit of air! So I cleaned my tank got it back on. My fuel gauge has a twisted square rod that runs up to the needle, float has a square in it that turns the...

Hi Carl, Good to hear the MEP003A is running. I was running my MEP002A off a Jerry can adapter because the fuel tank had some real nasty stuff in it. I looked in, took a sniff & told my son to remove the tank and set it outside. My gauge would have been stuck on "E" I just had to clean the...