Search results

Greg, I would remove the switch and clean the pressure side of it with electrical contact cleaner and then apply pressure to it while checking for continuity across the brass contacts. Worked for me. Jeff.

OK as mentioned earlier I had the new switch installed and no lights, removed the switch and stepped on the brake pedal and I could hear air comming out of the air pack. Went in the garage and pressure tested new switch at 10 PSI, 20, 30, 40,, all the way up to 130 PSI,with an ohm meter across...

Hey Guys, Thanks for all the input, I didn't have the time or energy to work on it yesterday after work, It was a long day. Recovery 4X4, I'm going to do what you recommended and I'll post the results later tonight, Thanks. Cranetruck, Thanks for the diagram, thats exactly how mine is...

I noticed one evening last year while backing the Deuce in the my drive way that I had no brake lights when stepping on the brake pedal. This happend the day before I was putting it away for winter storage and I didnt have alot of time to work on it. Over winter I purchased a few goodies for it...