Search results

I agree that leakage from the tranny is NOT the only reason that there can be clutch slippage. Engine oil leakage was not our prob, we've not lost a bit of engine oil since we did our first oil change. What I meant was that if one is leaking GEAR OIL from the tranny, out the bell housing AND the...

And the winner is . . . Spent yesterday under the rig pulling the tranny out, it had gotten too low and was still leaking after being driven at hyway speeds. Pulled off the cover plate and found, 1) that the cover plate bolts were not tight (enough, by my standards, but not the leak) and that...

Have checked them, not only checked them I took them out and pushed them open from the inside w/ the back-side of a drill bit. Just to make sure that they weren't stuck. We haven't put to many miles on it since I started this thread, w/ the build going on. It does seem to have almost stopped...

Gimpy, that was one of the first threads I read about this issue. In fact I've passed that info on to the man that has been my M35 teacher . . . made me feel smart! 8) I'll check the level again in tomorrow and see how far down it's gone. It just makes me nervous when the GO gets low . . . you...

Stumps, Thank you very much. I'm guessing the "cap" is on the outside, behind the throwout bearing? One of those things that require the tranny to be dropped :roll: I was thinking that I was headed that way. LowTech

Ok, read loads of threads but nothing seems to peg this. Started w/ a bad tranny, swapped that one out. Ever since we put in this one I've had a leak from the bellhousing. Did the the "drop the gear oil level down to 2 knuckles" that stopped it from pissing out while we drove, it would still...